Summary
Anticorrosion coating
epoxy.
|
|
U&V-AC
Product Description
U&V-AC is a general hardening VOC free epoxy with low viscosity.
It is used as an anti-corrosion coating material for filter plants
and as a protective coating material for exposed parts of concrete
structures.
Application
- Anti-corrosion Coating for Filter Plants
- Protective Coating for Exposed Concrete Structures
- Mixing equipment: Hand mixer.
- Gauge: Scales.
- Application equipment: Roller, brush.
- Good adhesive power regardless of prime materials
- No need for ventilation as a non solvent type
- Non-toxic & non-pollutant
- Abrasion resistant & chemical resistant
- Excellent self-leveling properties
Test Results
| Test
Item |
Unit |
Test
Result |
Test
Method |
| Turbidity
|
-
|
Under
0.5 NTU
|
KS
D 8502 |
Color
|
-
|
Under
1
|
KS
D 8502 |
| Consumption
of KMnO4
|
mg/L
|
1 |
KS
D 8502 |
Flavor
|
- |
No
Flavor
|
KS
D 8502 |
Odor
|
- |
No
Smell
|
KS
D 8502 |
Cyanide
|
mg/L
|
No
Detection
|
KS
D 8502 |
Phenols
|
mg/L
|
No
Detection
|
KS
D 8502 |
Amine
|
mg/L
|
No
Detection
|
KS
D 8502 |
Mixing Ratio
Directions
- Mix Type A and B using a hand mixer.
- Mixed material shall be used within a time allowable (within 30
minutes at normal temperature).
- As Type A contains filler it may settle down when a storage is
extended, thus agitate it sufficiently (one
- minute) using a hand mixer before mixing with Type B (hardener).
- Mix material using a mechanical method such as a hand mixer.
- A sufficient curing is required under the temperature below 50°F.
- Do not apply at temperatures below 31°F.
- Expired material should not be used.
- Allow a 3-day curing at normal temperature after final application.
- The container used for mixing initially shall not be used for
the 2nd mixing because once heated container may reduce the time
allowable for application.
- The viscosity tends to be high in low temperature .
- In case of high viscosity, add the warm water to bring down the
viscosity level.
- Refer to instruction on storage of powder or liquid-type material
for further details. If any problems persists, contact the manufacturer.
- In the event any discrepancies between the specification and
work environment, please consult the manufacturer or designer before
application.
|