Summary


Resistant coating water repellant coating.

 

 

Pace-1000


Product Description

Pace-1000 is a safe, user-friendly, odorless, non flammable water based acrylic polymer dispersion. It is a water repellent and multi-purpose elastomeric laminate coating with high adhesion and flexibility when coated on rough surfaces such as concrete flat-roofs, walls, masonry, and wood. It is non yellowing, UV resistant, and resistant to damage from oil, acid, salts, and alkali.

Application

    1. Concrete Flat Roofs
    2. Walls
    3. Coatings for Wood, Masonry, Etc.

Application Equiment

    1. Application tool: Spray, roller, brush.

Features

    1. Not water-soluble
    2. Non yellowing
    3. Suitable for coloring
    4. UV resistance
    5. Exhibiting good weathering resistance
    6. High elasticity, therefore of the high stress cracking resistance
    7. Impact damage resistance.
    8. Excellent resistance to damage from oil, acid, salts, alkali.

Test Results

Test Methods : ASTM C 1439, ASTM D 3637, ASTM D 3980, ASTM D 4364

Test Item
Test Result
Bond Strength
(N / cm2)
214
Tensile Strength
(N / cm2)
115

Elongation (%)
1,105
Tear Resistance (N/cm)
65
Absorption Ratio (%)
1 hour
5 hours
24 hours
0.20
0.22
0.25
Permeability Ratio (%)

0
Water Vapor Permeability
Suitability
Low Temperature Flexibility
No Effect
Acid Water Resistance
(2% HCl × 20¡É ×72hrs)
No Effect
Alkali Water Resistance
(2% NaOH ×20¡É ×72hrs)
No Effect
Salt Water Resistance
(3% NaCl-30days)
No Effect
Accelerated Weathering Resistance
(Sunshine Carbon ×120hrs)
No Effect


Directions

    1. Check concrete surface before application.
      (a double cross-coating in principle, after checking the surface at normal temperature)
    2. Spray equipment at normal coating spray or air spray.
    3. The amount of material per coat shall be controlled not to run down (Pace 1000).
    4. The 2nd coat shall be applied after checking the 1st coat’s curing with fingers.

Caution

    1. A sufficient curing is required under the temperature below 50°F.
    2. In case of any condensation on surface, the moisture shall be dried using heater, air compressor or portable burner before application.
    3. Do not apply at temperatures below 31°F and above 95°F.

Storage

    1. Refer to instruction on storage of powder or liquid-type material for further details. If any problems persists, consult the manufacturer.

Other

    1. Those not instructed in specifications may follow standard concrete specifications.
    2. In the event of any discrepancies between the specification and work environment, please consult the manufacturer or designer before application.

     
The RE-Systems Group © 2008
Privacy Policy
Home Turbo-Seal Projects Product Data Solutions About us Contact