Underwater (Harbor) Repair/Reinforcement Methods



22. Marine Structure MFRI Reinforcement Method

    1. Chip off concrete surface/water-jet cleaning
    2. Apply Dency-P (1 time)
    3. Spray RE-Shotcrete Mortar
    4. Install Anchors
    5. Install Fiber Rods
    6. Spray RE-Shotcrete Mortar
    7. Apply U&V-GL (2 times)


23. Aramid Sheet Reinforcement Method

    1. Chip off concrete surface/water-jet cleaning
    2. Apply Dency-P (1 time)
    3. Brush G&W Mortar (1 time)
    4. Apply RE-CA Mortar (Clean up unevenness)
    5. Apply U&V-H
    6. Adhere Aramid Sheet
    7. Impregnate U&V-H
    8. Spread silica


24. Aramid Sheet Reinforcement Method (cross in 8 inch intervals)

    1. Chip off concrete surface/water-jet cleaning
    2. Apply Dency-P (1 time)
    3. Brush G&W Mortar (1 time)
    4. Apply RE-CA Mortar
    5. Apply U&V-H
    6. Bond Aramid Sheet
    7. Impregnate U&V-H
    8. Spread silica


25. Separation & Exfoliation Section Restoration Method

    1. Chip off concrete surface/water-jet cleaning
    2. Apply Dency-P (1 time)
    3. Brush G&W Mortar (1 time)
    4. Apply RE-CL Mortar
    5. Apply U&V-GL (2 times)


26. Cracks Repair Injection Method

  1. Chip off concrete surface/water-jet cleaning
  2. Install injection pipe
  3. Sealing
  4. Inject U&V-GL
  5. Remove injection pipe and V-cutting
  6. Fill up with G&W Mortar
  7. Apply U&V-GL (2 times)


27. Exposed RE-bar Section Restoration Method

  1. Chip off concrete surface/water-jet cleaning
  2. Apply Dency-P (1 time)
  3. Brush G&W Mortar (1 time)
  4. Apply RE-CL Mortar
  5. Apply U&V-GL (2 times)


28. Underwater Scoured Parts Repair Method

  1. Chip off concrete surface
  2. Water-jet cleaning
  3. Install GRC Panel mold
  4. Pour Hydraulic Mortar (U&V-W Mortar)




The RE-Systems Group © 2008
Privacy Policy
The RE-Systems Group © 2008
Privacy Policy
The RE-Systems Group © 2008
Privacy Policy