Turbo-Seal

Turbo-Seal Waterproofing Gallery

Solutions

Comercial Re-roofing Blind Side Waterproofing Below Grade Parking Green Roof Solutions Restorative Membrane Injection Rooftop Parking Expansion / Traffic Joints Injection Grouting Concrete Reinforcement Below Grade Waterproofing






Turbo-Seal: The solution to waterproofing

A new concept in waterproofing materials, Turbo-Seal is a flexible gel that bonds to any surface to create an impervious waterproofing membrane. Comprised of over 25% post consumer recycled content, Turbo-Seal is formed by combining a polymer rubber with special adhesives. Turbo-Seal can be applied as a membrane for new construction waterproofing or injection repair material in any environment. Application is easy pansion and contraction or other environmental factors. This cold applied, one component membrane can be troweled or injected by a simple, easy to maintain rotor stator pump.


Adhesion
flexibility
INJECTABLE MEMBRANE
Adhesive and Cohesive properties

Why cure when you can heal?

This is a movie that demonstrates the self healing properties of Turbo-Seal under hydrostatic pressure. Due to the bentonite component of Turbo-Seal and the fact that Turbo-Seal never completely cures, it exhibits the remarkable ability to self heal, even under hydrostatic pressure. In situations where the Turbo-Seal waterproofing membrane is punctured or cut, Turbo-Seal will automatically heal itself and maintain the water tight integrity of the membrane system. No other waterproofing membrane can prove such a remarkable capacity to retain its waterproofing integrity.


cutting demostration
Fish Tank Demo

Turbo-Seal maintains a strong bond even under water or with different construction materials

Existing waterproofing materials do not maintain their adhesiveness in these conditions.

Active responsiveness to substrate movement and vibration

Due to Turbo-Seal’s responsiveness to substrate movement and vibration, there is no need for the repeated repair of cracks/separation of the waterproofing membrane. Other waterproofing materials cure and crack, leading to water intrusion, Turbo-Seal never completely cures giving it the remarkable ability to self heal and weather the constant stress of thermal expansion/contraction or vibration.

Save time, save money

Most waterproofing membranes have a tendency to fail due to improper installation, low quality materials or improper design. When a waterproofing membrane has failed costly, time consuming work is required to replace the compromised membrane. Turbo-Seal is simply injected into the compromised membrane to instantly restore it’s waterproofing integrity.

Features of Turbo-seal

 
Feature
Benefit
Adhesive Adhesive even in wet conditions, active water leaks, and on surfaces with foreign materials
 Ease of application and qualityy.
Self Healing Self-healing capabilities, puncture resistant. Easy repair and maintenance.
Flexible Durable to shocks, vibration, continuous stress. Responsive to substrate movement, integrity of the waterproofing layer is retained.
One Component No mixing, easy to apply, safe, and easily stored. No curing of the waterproofing layers necessary. Cost-effective, reduce labor, save time, fewer mistakes.
Non-Toxic High solids content, solvent free, environmentally friendly, no VOC’s. Safe for installers, not harmful to the environment.
Durable Chemically resistant, resistant to the freeze/thaw cycle. Effective and long lasting seal.

types of turbo-seal

Classification
Use
Waterproofing
Turbo-Seal-P Waterproofing product for new and existing, above and below grade construction. Membrane waterproofing for new and existing building structures.
Turbo-Seal-R Leakage repairing product for ground structure. Drilling in front of waterproofing layer and inject into front and back side of waterproofing layer.
Turbo-Seal-U Leakage repairing product for underground structure. Rear side grouting by drilling into the waterproofing layer.